SAFEST
Launch Setup Guide | v2025
01
Windows Defender
-
›
Step 1 Open Windows Defender settings.
-
›
Step 2 Go to Virus & Threat Protection.
-
›
Step 3 Press Manage Settings under Virus & threat protection settings.
-
›
Step 4 Disable ALL toggles on this page.
02
HVCI — Memory Integrity
Why? HVCI (Core Isolation) prevents unsigned drivers from loading — this must be disabled before running the loader.
-
›
Step 1 — Open Windows Security Press Win + S, type Windows Security and open the app.
-
›
Step 2 — Device Security In the left-hand menu click Device security.
-
›
Step 3 — Core Isolation Details Under Core isolation, click Core isolation details.
-
›
Step 4 — Disable Memory Integrity Toggle Memory Integrity to OFF, then restart.
03
Exploit Protection
-
›
Step 1 Open Windows Security → App & browser control.
-
›
Step 2 Scroll to Exploit protection and click Exploit protection settings.
-
›
Step 3 Ensure all system-level and program-level exploit protection options are set to Off.
04
Virtualization
Note: Virtualization is used internally to protect the solution. It must be disabled at the hardware (BIOS) level.
AMD — Disable SVM Mode
- ›Step 1Restart your PC and enter BIOS (commonly F2, DEL, or ESC).
- ›Step 2Navigate to the Advanced tab.
- ›Step 3Locate SVM Mode (Secure Virtual Machine).
- ›Step 4Set SVM Mode to DISABLED.
- ›Step 5Save & restart.
Intel — Disable VT-x
- ›Step 1Restart your PC and enter BIOS (commonly F2, DEL, or ESC).
- ›Step 2Navigate to the Advanced tab.
- ›Step 3Locate Intel Virtualization Technology (VT-x / Intel VT).
- ›Step 4Set Intel Virtualization Technology to DISABLED.
- ›Step 5Save & restart.
05
Secure Boot
Why? Secure Boot prevents unsigned software from launching at startup. It must be turned off.
- ›Step 1Enter BIOS on restart.
- ›Step 2Open Advanced Settings.
- ›Step 3Navigate to the BOOT or SECURITY section.
- ›Step 4Open Secure Boot subsection.
- ›Step 5Open Key Management and click Clear Secure Boot Keys.
On some motherboards you simply toggle Secure Boot to Disabled instead. - ›Step 6Save settings & restart.
06
Download & Run
- Download the loader from the official site and run the installer.
- Make sure the game is completely closed before running the loader.
- Launch the loader and enter your key.
- Wait until the loader prompts you to re-enter your key, then input it again.
- When the loader displays "Press any key to inject when in-game..." — launch the game. Do not open the game before this step.
- After you're in the game lobby or have started a match, switch back to the loader and press any key to inject.
- Once injection is successful, press INSERT to open or close the menu.